(NOTE: This will be the last article in my "Bells and Whistles" series for a while. I plan to post some more entries at a later date.)
A PDF version of this article (with graphics) is available on my website. It provides some nice illustrations of the steps that I can only describe in words here on the board. The PDF file is not indexed. You have to click the link or type in the address to get it:
http://www.rolandstroud.com/FadeIn/F...ngFountain.pdf
---------------------
BELLS AND WHISTLES #3
Importing Fountain Text
Going Back in History. In the early days of the internet, screenplay formatting online was a lot more primitive than it is now. We usually wrote screenplay text like this:
The common practice was to type everything flush against the left margin (except for transitions, if we used them). Paired *asterisks* or paired _underscores_ were markers for conveying emphasis.
Many writers use essentially the same technique today, with a few enhancements, for drafting screenplay text. The technique has become part of Fountain style.
What Is Fountain? Fountain is a simple but rich and useful markup method for preparing screenplay text in a text editor or a word processor. (You only rarely need to use any markup.) You type text as I did in my example, and then you import the text into a screenwriting application (or some other converter program) that supports the Fountain format. For example, Fade In supports Fountain. When you import a Fountain file, Fade In converts it in a flash to normal screenplay format.
Creating Fountain Text. You can use any text editor or any word processor to create your text. Be aware, though, that some issues can arise from the type of text encoding that your text follows. (Damn, why can nothing ever be simple? Sigh.) However, all of this is easy to work with. You do not even have to understand it. Just do as I say in the following options. Then I will have some comments on them.
Reading each of the options will help you to understand the whole process. Ultimately you will import your Fountain file into Fade In, or you will perform a copy-and-paste of text. More about all of this in a moment.
Options
1. Use a Text Editor
Importing a Fountain file into Fade In is really easy. You just have to make sure that you have saved it as Unicode text if you have used any special characters like “curly quotes” or em-dashes like this — a longer dash than a hyphen.
For the import, use File > Import > Fountain.
So what happens if you do not save your text as Unicode and then you import into Fade In? That is easy to answer. Your curly quotes and em-dashes are just left out entirely. You have an empty space where they are supposed to be, as in this scene heading, which had em-dashes in the original:
The Result After Importing
Fade In does a fantastic job of converting Fountain to screenplay format. I tried importing the example that I provided at the start of this article, and it imported perfectly. Even the line that only had DR. OSWIN on it was correctly read as action (because a blank line followed DR. OSWIN). The markup form *new* was converted to new.
Fade In can do even more remarkable things. For example, it handles dual dialogue — and I regard that as a real accomplishment.
To tag something as dual dialogue you just put a caret ^ after the name of the second speaker in the dual-dialogue exchange. Just watch this.
When this text is imported as Fountain, we see:
That particular exchange of dialogue is not something where you really need dual dialogue, but I was just using it as an example.
FINAL DRAFT
Final Draft does not support Fountain directly. You can have some moderate success by importing a Fountain file as a text file (rename it to .txt first). However, Final Draft stumbles on some things. For example, Final Draft imported the line about the plaque that displays DR. OSWIN (which is action) as a character name, even though a blank line followed DR. OSWIN; then it interpreted the following action paragraph as dialogue for DR. OSWIN.
SOME CONCLUDING REMARKS
Markup Codes. In general, you do not need to use any Fountain markup codes. But occasionally you need them (like the *asterisk pair* for italics). You can find a list of Fountain markup codes on the Fountain website:
https://fountain.io/syntax#section-overview
Title Pages. You can even create your title page with Fountain. It is simple, but you should read the website for full details. Essentially you just type some keys (like Title), followed by a colon and a value. Multiple values are indented and placed on the next line. Here is an example. Multiple values, like those below Contact, are indented by at least three spaces or a tab. When you are through with the title page information, put a blank line into your text before you start your screenplay.
Try writing in Fountain format and importing or pasting the text into Fade In. You will be impressed.
---------------------
(Follow me on Twitter: @RolandRayStroud)
(* Tags: comicbent done_deal_pro donedealpro stroud bells whistles fade_in fadein fadeinpro fade_in_pro screenwriting software fountain *)
A PDF version of this article (with graphics) is available on my website. It provides some nice illustrations of the steps that I can only describe in words here on the board. The PDF file is not indexed. You have to click the link or type in the address to get it:
http://www.rolandstroud.com/FadeIn/F...ngFountain.pdf
---------------------
BELLS AND WHISTLES #3
Importing Fountain Text
Going Back in History. In the early days of the internet, screenplay formatting online was a lot more primitive than it is now. We usually wrote screenplay text like this:
Code:
INT. MEDICAL OFFICE — RECEPTION — DAY The office has a vaguely African theme, with wicker handicraft items, ebony-colored objects on the walls, and paintings and silhouettes of warriors and pregnant women. A plaque inside the reception window says: DR. OSWIN The RECEPTIONIST looks at Hesper standing at the window. RECEPTIONIST (with no enthusiasm) May I help you? HESPER I’m Hesper Grayson. I have an appointment with Dr. Oswin at four-thirty. I’m a new patient. RECEPTIONIST You say *new*? We don’t accept new patients. HESPER But Mrs. Scalia called you. She said it was all arranged. RECEPTIONIST Oh, Mrs. Scalia ... yes, of course. At four-thirty.
Many writers use essentially the same technique today, with a few enhancements, for drafting screenplay text. The technique has become part of Fountain style.
What Is Fountain? Fountain is a simple but rich and useful markup method for preparing screenplay text in a text editor or a word processor. (You only rarely need to use any markup.) You type text as I did in my example, and then you import the text into a screenwriting application (or some other converter program) that supports the Fountain format. For example, Fade In supports Fountain. When you import a Fountain file, Fade In converts it in a flash to normal screenplay format.
Creating Fountain Text. You can use any text editor or any word processor to create your text. Be aware, though, that some issues can arise from the type of text encoding that your text follows. (Damn, why can nothing ever be simple? Sigh.) However, all of this is easy to work with. You do not even have to understand it. Just do as I say in the following options. Then I will have some comments on them.
Reading each of the options will help you to understand the whole process. Ultimately you will import your Fountain file into Fade In, or you will perform a copy-and-paste of text. More about all of this in a moment.
Options
1. Use a Text Editor
- Type your text in a text editor such as Notepad, Notepad++, Notepad2, or various other free editors that are available.
- IMPORTANT: Do not use any characters except those that have keys on your keyboard. That means no curly quotes or curly apostrophes. No em-dashes (just plain old typewriter-type hyphens). Why? Because use of only keyboard characters avoids problems with encoding.
- Save your work with a .fountain extension. It is really a text file, but use the .fountain extension anyway.
- Type your text in a text editor such as Notepad++ or Notepad2, or any editor that lets you select and change the text encoding. I know that this sounds scary, but it is very simple. By the way, you cannot use the Windows Notepad for this.
- You can insert curly quotes and em-dashes if you know how (by typing codes on the numeric keypad with NumLock on), and you can import or paste text with curly quotes and em-dashes.
- Your text should be Unicode. Notepad++ and Notepad2 tell you what encoding is in use. If you are using Windows, it is probably ANSI. Change the encoding from ANSI to Unicode (if it is not already Unicode). Select UTF-8 (a form of Unicode) if it is available. If you are using Notepad2, you do this under File > Encoding > UTF-8. You can do this at any time. The important thing is to save the file with that encoding. Save the file with a .fountain extension.
- This is the method that I prefer, because you can use all the features of a word processor. For example, Word and LibreOffice have what Word calls its “track changes” feature, which allows you to show deletions and changes as you work.
- I suppose you can use just about any modern word processing program. The key step is that you have to save your file as text, and specifically as some form of Unicode (e.g., UTF-8) if you have used any special characters like curly quotes and em-dashes. In Word, you save as text, and in the process Word asks you about the encoding that you want. In Word 2010 you choose Other encoding and then UTF-8.
- If you do not use any special characters like the curly quotes, then the word processor option is just like Option 1, and you do not have to save as Unicode. CAUTION: Some word processors have their options set to produce curly quotes and em-dashes by default. That is usually helpful, and Fade In loves special characters — but if you use any of these special characters, you have to save as Unicode.
- In the tests that I have run, you can copy-and-paste text from a word processor or text editor with no regard to the ANSI/Unicode issue. When you paste the text into Fade In, the special characters work just fine.
- To paste Fountain into Fade In:
1. Copy the Fountain text that you want.
2. Right-click in Fade In. Select Fountain > Paste as Fountain.
2. Right-click in Fade In. Select Fountain > Paste as Fountain.
- I have had good luck with the copy-and-paste method. However, I think that it is better to import the Fountain file and to reserve the copy-and-paste method for bits and pieces of text.
Importing a Fountain file into Fade In is really easy. You just have to make sure that you have saved it as Unicode text if you have used any special characters like “curly quotes” or em-dashes like this — a longer dash than a hyphen.
For the import, use File > Import > Fountain.
So what happens if you do not save your text as Unicode and then you import into Fade In? That is easy to answer. Your curly quotes and em-dashes are just left out entirely. You have an empty space where they are supposed to be, as in this scene heading, which had em-dashes in the original:
Code:
INT. MEDICAL OFFICE RECEPTION DAY
Fade In does a fantastic job of converting Fountain to screenplay format. I tried importing the example that I provided at the start of this article, and it imported perfectly. Even the line that only had DR. OSWIN on it was correctly read as action (because a blank line followed DR. OSWIN). The markup form *new* was converted to new.
Fade In can do even more remarkable things. For example, it handles dual dialogue — and I regard that as a real accomplishment.
To tag something as dual dialogue you just put a caret ^ after the name of the second speaker in the dual-dialogue exchange. Just watch this.
Code:
Hesper tentatively touches one of the big wooden snakes. A door swings open. DR. OSWIN smiles broadly beneath an old-fashioned handlebar mustache. DR. OSWIN Hesper! Come in, my dear. HESPER^ Oh, hello, Doctor. He takes Hesper by the arm.
Code:
Hesper tentatively touches one of the big wooden snakes. A door swings open. DR. OSWIN smiles broadly beneath an old-fashioned handlebar mustache. DR. OSWIN HESPER Hesper! Come in, my dear. Oh, hello, Doctor. He takes Hesper by the arm.
FINAL DRAFT
Final Draft does not support Fountain directly. You can have some moderate success by importing a Fountain file as a text file (rename it to .txt first). However, Final Draft stumbles on some things. For example, Final Draft imported the line about the plaque that displays DR. OSWIN (which is action) as a character name, even though a blank line followed DR. OSWIN; then it interpreted the following action paragraph as dialogue for DR. OSWIN.
SOME CONCLUDING REMARKS
Markup Codes. In general, you do not need to use any Fountain markup codes. But occasionally you need them (like the *asterisk pair* for italics). You can find a list of Fountain markup codes on the Fountain website:
https://fountain.io/syntax#section-overview
Title Pages. You can even create your title page with Fountain. It is simple, but you should read the website for full details. Essentially you just type some keys (like Title), followed by a colon and a value. Multiple values are indented and placed on the next line. Here is an example. Multiple values, like those below Contact, are indented by at least three spaces or a tab. When you are through with the title page information, put a blank line into your text before you start your screenplay.
Code:
Title: THE SNAKE HOUSE Credit: Written by Author: Roland Stroud Draft date: July 16, 2017 Contact: Email: [email protected] Telephone: 555-555-5555 FADE IN: Etc.
---------------------
(Follow me on Twitter: @RolandRayStroud)
(* Tags: comicbent done_deal_pro donedealpro stroud bells whistles fade_in fadein fadeinpro fade_in_pro screenwriting software fountain *)
Comment